Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I Found a Brass Plug where my Oil Senor should be? 700 1986

posted by  Stag on  Sun Jun 13 12:19 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Frist things first, thanks to all who take the time to look at this post!
With that said, I own a 740 GLE Wagon, with the B230F engin. I have done alot of work to this car just to make it road worthy (it was not maintained at all). I have spent countless hours on my brick an now it runs with everything working properly except for the fact that there is a Brass Plug where the oil pressure sensor should be. I don't know if this is how this engin should be or if the last owner had it put in (I have found all kinds of mistakes) for some odd reasion?
Anyway, I would hate to see all of my hard work got to waste because of an unknown oil problem.
Is this the way it came from the factory and if so can I get the proper sensor for this engin after market or something?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I Found a Brass Plug where my Oil Senor should be? [700][1986]
posted by  Stag  on Sun Jun 13 12:19 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.