Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

94 940 brake job questions 900

Well, the time has come to finally replace that warped rotor I have up front. I've got all the parts ordered that I think I'll need. I have the 11" Girling ABS system (in the front anyway). Going to replace the rotors with the Brembo ones offered by FCP along with some new metal master pads.

I've decided that while I'm down there, I'll upgrade to braided brake hoses on the front and rear. Since this is my first real brakejob, I've been reading the FAQ thoroughly. I have just a few more questions for the experts out there.

I'm curious about how much brake fluid I'm going to need to flush the system, do bleeding, and whatnot. I bought one of those Motive power bleeders from FCP when I ordered the rest of the stuff. If that makes any difference.

Also, would it be good to just go down to the dealer here in Omaha and buy new caliper hardware? The rear ones looked ok, but I haven't had a chance to get the front calipers apart. How much do the pins, etc, usually run from a dealer?

Thanks everyone, your help has made owning my Volvo much more affordable and fun!

Sincerely,
Matt
--
1994 Volvo 940 n/a Wagon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 94 940 brake job questions [900]
posted by  Volvo_geek  on Tue Jun 15 05:37 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.