Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Questions about changing inner tie rod 700 1985

posted by  rduke on  Fri Jun 25 02:13 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi all,

I am changing my inner tie rod this weekend (740 turbo with cam rack). I read the FAQ and it is pretty clear, but I am a bit worried about holding the rack gear with a wrench while unscrewing the inner tie rod. Isn't that bad if I ding up the gear with a wrench. Also, the inner tie rod is round and smooth so there is nothing to grip with a wrench. Will large channel locks grip it enough to unscrew the inner rod from the cam rack ?

Thank,

R Duke






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Questions about changing inner tie rod [700][1985]
posted by  rduke  on Fri Jun 25 02:13 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.