Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

flametrap revisited 200

Ok, so the jiggle test failed. I have no vacuum at the oil filler cap. Removed the flame trap, put in a new one, a new "y". even pushed a hose down into the hose going to the breather box and blew and felt my breath coming out of the oil filler hole. Blew in the small tube going to the manifold and the large one at the top of the flame trap. Nothing is obstructed.
Yet, the jiggle test still fails, and I have still have no vacuum being drawn.
Thoughts?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New flametrap revisited [200]
posted by  superglyde  on Mon Jun 28 03:26 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.