Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PRV 6 rocker arms 200

posted by  someone claiming to be Erik_B on  Fri Jul 2 01:06 CST 2004 [RELATED]

I have a 1979 264 GL with a B27F engine, and I suspect that a few of the rocker arms on the right cylinder bank are starting to wear down.
I lifted the rocker covers last year for inspection of the camshafts/rockers and adjustment of the valve clearence. At that time the cams looked fine, but there is still a light "knocking" from the right cylinder bank.
Except from that, the engine appears to bee in a fair condition , having only approx. 112K miles on the clock.

Anyway my question is : Has anyone tried to replace the rocker arms, with the engine in the car without removing the heads ? Is it possible to pull the rocker shafts forward, and out, to release the rockers ?

I would really appreciate any advices regarding this job.

Best regards,

Erik





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PRV 6 rocker arms [200]
posted by  someone claiming to be Erik_B  on Fri Jul 2 01:06 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.