Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M47 leaking 900 1993

posted by  mila on  Mon Jul 5 06:57 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 5 06:26 CST 2014
[RELATED]

Hi,

Has anybody seen a M47 leak from the hole for the gear lever?
I changed the rear sealing for the drive flange some years ago, at about 190 kmiles.
It's a little difficult to tell exactly where the leak is, but it looks messy around the gear lever, possibly dripping down on the back wall of the box and onto the drive flange. Or could it leak at the drive flange and spray upwards onto the gear lever?
If it is an o-ring or sealing for the lever, is it possible to change it without removing the gearbox from the vehicle? I know the flange sealing is doable without removing the box.
Patient is a 1993 945 240 kmiles.

Thanks for any help,
Mikael Larsson






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.