Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wire between ignition switch and instument warning lights 900

posted by  analogdad on  Tue Jul 6 13:46 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 16 11:22 CST 2014
[RELATED]

I'm tracking down an intermittant problem that causes the warning lights in the instrument panel to remain unlit with the key on. When this occurs, I find a good "ground" circuit between the alternator warning light and the D+ post on the alternator. I'd like to test for 12V into the panel from the ignition switch, but not sure* which wire supplies it. Does anyone know which wire is the power source?

*My Haynes manual shows a blue/red wire from the ignition switch to the warning lights, but their wiring diagram is for a 940SE, so I don't trust it applies to my plain Jane 940 (has a different fuse box for one).






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wire between ignition switch and instument warning lights [900]
posted by  analogdad  on Tue Jul 6 13:46 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.