Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2017 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Installing an Aftermarket AC Compresser 900 1993

posted by  Choices on  Tue Jul 6 17:52 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 16 10:32 CST 2013
[RELATED]

An indy shop diagnosed my loss of R134 (recharge needed in about 2 weeks)to a leak in the compresser. I want to install an aftermarket (Seltec) unit from Groton. I know the connectors are both vertical, not the OEM "V", but the threads on the connector nearest the block are different than OEM. An earlier post (from Chrissij, I think) mentioned an aftermarket hose #1347730 (Whose part?) but said that I also needed an aftermarket accumulator. I installed the same compresser on my 90 744 using the OEM R134 conversion kit, so would that hose work with my exixting accumulator? It has been capped since the system was torn down. Any other suggestions about how to proceed, and possible sources for a drawing - its been so long I'm afraid I may have forgotten how to reassemble it. Thanks..

Jim Weiss
83 245T, 90 744T/M46, 90 760T, 945T sweatbox, want more . . .





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing an Aftermarket AC Compresser [900][1993]
posted by  Choices  on Tue Jul 6 17:52 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.