The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Installing an Aftermarket AC Compresser 900 1993

An indy shop diagnosed my loss of R134 (recharge needed in about 2 weeks)to a leak in the compresser. I want to install an aftermarket (Seltec) unit from Groton. I know the connectors are both vertical, not the OEM "V", but the threads on the connector nearest the block are different than OEM. An earlier post (from Chrissij, I think) mentioned an aftermarket hose #1347730 (Whose part?) but said that I also needed an aftermarket accumulator. I installed the same compresser on my 90 744 using the OEM R134 conversion kit, so would that hose work with my exixting accumulator? It has been capped since the system was torn down. Any other suggestions about how to proceed, and possible sources for a drawing - its been so long I'm afraid I may have forgotten how to reassemble it. Thanks..

Jim Weiss
83 245T, 90 744T/M46, 90 760T, 945T sweatbox, want more . . .






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.