Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Drive Shaft Replacement 200 1990

posted by  leblanc3 on  Sun Jul 11 13:52 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

'90 245: My son and are in the process of restoring the car we bought to replace an '81 244. I have an '81 and an '87 parts car. I was thinking about taking the drive shaft from one of these, preferably the '81, since it is completely dismantled, and having the u-joints replaced and replacing the center support bearing. Then I could simply install it on the new car.

Am I completely off-base with this idea? Does the drive shaft need to be balanced, and if I have this done, does something need to be done to balance it on the car?

Any and all advice is appreciated.

Randy '90 245; '87 244





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Drive Shaft Replacement [200][1990]
posted by  leblanc3  on Sun Jul 11 13:52 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.