Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front Wiper Motor--repair or replace? 200

posted by  Runinturtle2 on  Tue Jul 20 18:32 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

This front wiper motor gear case from a 1990 244 clearly shows a cracked cam wheel (for the “park” position contacts). Also, the square keyway at the hub of the cam has no matching key in the supporting spindle from the larger gear underneath. How is the cam supposed to be driven? Did the key wear off the spindle? As it is here, the cam remains still when the wiper motor runs, and the wipers will not park.
.
Is it possible to remove/ replace the larger gear inside the case (to drive the cam), or is replacement of the whole motor assembly necessary? Any experiences with this?
--
Jim (90 244DL 170K miles) turbo sways w/poly, front struts & bushings, OD wiring







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Wiper Motor--repair or replace? [200]
posted by  Runinturtle2  on Tue Jul 20 18:32 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.