Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Diffuclty level of replacing heater valve/hoses?FED UP WITH WAITING FOR MECHANIC 700 1990

Fed up with waiting for my mechanic.(he's fully booked and i've taken a number(actually he's taken my #)for a week.He's still not called me to take my car in.

I am thinking of replacing the stat,rad(14 YRS),heater hoses/valve(14 yr),which my mechanic advised against replacing BUT is strongly advised by this list for >8 yr old rads.He's of the if it aint broke,dont fix school.

I've got the parts.In the past Ive replaced a Mercedes Behr radiator with a Nissens(similar setup),volvo brake pads and discs,and cleaned the flame trap and hose brand brass nipple etc.
I think there should be no problem with replacing the rad myself(2 row metallic Tropical Nissens)
but any advice on the heater hoses/valve is welcome.
Would there be more or less DEXTERITY involved in reaching near the firewall?
Do I need to use PVC plumber's tape to thread the fan switch into the rad,or would it interfere with the NEGATIVE electrical contact.
thanks
tOM






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Diffuclty level of replacing heater valve/hoses?FED UP WITH WAITING FOR MECHANIC [700][1990]
posted by  someone claiming to be tom108  on Sat Jul 24 08:37 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.