Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

resoldering instrument cluster circuit board 900

posted by  someone claiming to be analogdad on  Mon Aug 9 14:14 CST 2004 [RELATED]

Just after I posted a final report on resolving my instrument cluster issues, the warning lights started misbehaving again. Since so many mentioned finding faulty solder connections on the plastic circuit board, I figure it's time to resolder mine. So, I'm looking for advice from those who've done this:

- I'm concerned about damaging/overheating the plastic that the circuit is printed on
- Any precautions to avoid damage to the resistors that are soldered to the board - and are likely what needs to be resoldered

Any help much appreciated.

John Flynn
72 142e
81 244
82 244ti
85 245
90 244
93 940






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New resoldering instrument cluster circuit board [900]
posted by  someone claiming to be analogdad  on Mon Aug 9 14:14 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.