Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Thanks, guys, more about warin (wiring) in the 140 140-160

posted by  someone claiming to be Jim Hampton on  Thu Aug 19 15:23 CST 2004 [RELATED]

I took your advice, Shayne, about connecting the wire to terminal 87 with the wire to 30/51, but figured that's the same as running a wire from terminal 50 on the ignition switch. It works. I'm still bumfuzzled with the reverse lights, though. I've found the wire to the backup lights and, of course, connection to the switch on the tranny is the spade connector on the rear of the cover. Can I just get another relay and connect a wire from the tranny switch and the wire to the reverse lights to it with the power coming from a teminal (whichever one it is) in the ignition switch? You can probably tell I don't know a lot abouit this stuff.

Thanks a lot,

Jim Hampton






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Thanks, guys, more about warin (wiring) in the 140 [140-160]
posted by  someone claiming to be Jim Hampton  on Thu Aug 19 15:23 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.