Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Distributor will not budge! 200 1983

posted by  MartyNeilan on  Sat Aug 21 05:48 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Well, I found out what my no-spark problem was - the stupid little wires coming off the distributor (hall effect?) were cracked. Looks like that area had been monkeyed with before, and the snap ring inside the distributor was cracked as well. I figured I will either solder the wires or replace the whole assembly.
BUT, I can't pull the distributor! I took the 13mm bolt out, and the distributor still won't turn. I have sprayed it with WD40 and have tried whacking it with a mallet, but it still won't turn or pull. Am I forgetting something?

Note: when I "set" the timing last week, I didn' have to adjust anything, it checked out ok, so the distributor may not have been rotated in many years.

--
1983 240 -- This car is a gas to drive!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Distributor will not budge! [200][1983]
posted by  MartyNeilan  on Sat Aug 21 05:48 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.