Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

louver vacuum hoses in the dash console connected wrong...know rite way?? 200 1986

uid 25253's pic
posted by  Cabbie2169 on  Sat Aug 28 04:47 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Must have connected them wrong when I had the front dash console apart. All the air louvers are continuously open even when I depress the Recirc, foot direction, etc. Which vacuum hoses are supposed to be connected to which manifold port? When I took everything apart, the louvers were responding; however, when I put everything back together, all louvers are continously open. Funny this is when I took everything apart, there was this one vacuum hose that was disconnected...I figured that it just came loose from one of the manifold ports, so I chose a port and plugged it back up. Now nothing works. Does anyone have a diagram, picture, explanation? I looked at the blower motor replacement pictures, but you can't really see anything specific from there.
Thanks,
Cabbie2169






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New louver vacuum hoses in the dash console connected wrong...know rite way?? [200][1986]
posted by  Cabbie2169  on Sat Aug 28 04:47 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.