Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

WHERE'S THE BOOST!!! 200

posted by  helievacpilot on  Sat Nov 13 01:13 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

1983 244 GLT. Recently sent my 48/42 turbo in for a rebuild and upgrade to a 48/60. Upon return, the vacuum line from the wastegate actuator was plumbed to the compressor housing. I plugged the fitting at the compressor housing and connected the vacuum line back to the stock location. Now, I only seem to be able to get boost halfway into the yellow. By changing the vacuum line routing to the wastegate accuator, did I affect something? Is the wastegate not fully closing under boost? Can the wastegate be adjusted to increase boost? I do see on many turbos that the wastegate accuator is plumbed to the compressor housing. Is this a better setup? Why does Volvo do it differently?

thanks for all the info - Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New WHERE'S THE BOOST!!! [200]
posted by  helievacpilot  on Sat Nov 13 01:13 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.