Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How do you replace the 2 small steel lines connecting from your steering rack to your power gear box 700

Greetings:

I would like to know, what is the easiest approach in replacing the 2 smaller power steering lines, that are located underneath/inbetween the frame. The connect to the steering rack and the gear box. I have the smaller one out already, however i had to losen the 2 1/2 bolts that support the rack in order to get to the longer line. My question is would i have to suppport the rack upon removing these two supporting bolts? I just need about a good half inch or so to slide the old line out and the new one in. The brackets are currently keeping me from doing this. I just don't want to remove these bolts and have my steering rack to drop and get damaged. Please help!!!!


89 740 gle wagon A.T. aw-70 8 VALVE 285,000 PLUS MILES.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 How do you replace the 2 small steel lines connecting from your steering rack to your power gear box [700]
posted by  someone claiming to be 747  on Tue Nov 23 02:05 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.