Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Breather Box removal for 945T 900 1995

posted by  someone claiming to be jwt on  Fri Nov 26 20:44 CST 2004 [RELATED]

Just bought a 1995 945T and dealer report from POs last visit says breather box seal is leaking. So I bought the o-ring and am attempting to replace it. How do I get the steel lines off of the EGR valve so I can get it out of the way to remove breather box? I have tried spraying with loosening compound and leaving for a day. I have tried tapping the lines while applying pressure away from the valve but so far no movement. I'm beginning to think a small oil leak is minor compared to damaging a probably expensive component. Any suggestions?

1985 245T & 1995 945T






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Breather Box removal for 945T [900][1995]
posted by  someone claiming to be jwt  on Fri Nov 26 20:44 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.