Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'89 b230ft outlet fitting at block to heater control valve is leaking 700 1989

posted by  steve m on  Fri Nov 26 22:31 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun May 4 02:48 CST 2008
[RELATED]

To the brickboard again ..... Can't find this in faq's
outlet fitting, at block, for hose from block to heater control valve is leaking between the fitting and the block. Appears the fitting is press fit into block? Can the fitting to block "connection" be resealed? Seem's to me jb weld fixed a leak like this for me once b4.

Can't be resealed? how do I get the fitting out of the block to replace it? I assume after the fitting's removed a new fitting is tapped into the block with a rubber mallet or block of wood?
Thanks
--
steve m






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '89 b230ft outlet fitting at block to heater control valve is leaking [700][1989]
posted by  steve m  on Fri Nov 26 22:31 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.