Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Unable to get the correct idle speed 200 1988

posted by  rsjones on  Sat Nov 27 12:14 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Apr 3 17:15 CST 2014
[RELATED]

I followed all the steps to set the idle speed on my car.I installed a M46 trans. in my wagon and the idle speed won't drop to but 1000 rpm's When the auto was in it idle to around 750 to 800 rpm's. I guess the lighter flywhell compared to the torq converter made the difference.I have taken the T/B off and cleaned it checked for vac leaks. reset the idle linkage change the throttle linkage checked the idle control valve but nothing works. What do I need to look for and what is next.I also adjusted the idle air knob on the bottom of the T/B
Thanks
Rodney





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Unable to get the correct idle speed [200][1988]
posted by  rsjones  on Sat Nov 27 12:14 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.