Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

cam bearings, B20 1800

posted by  jaydee on  Mon Nov 29 17:05 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

Good day.
My questions for today are:
1: what is the method to remove cam bearings from the block. They are the last item to be removed remove except for the oil gallery plugs which I don't seem to be able to budge with my 1/4 inch drive.
2: What is the method for installing new cam bearings?
3: Is it usual practice to replace cam bearings when a full overhaul is being done? As the block will be going out for hot tanking and reboring I suppose it is likely the cam bearings will be trashed in the process anyway if I leave them in. They seem to be in good shape though. If I can remove them prior to taking the block to the machine shop, can I safely reuse them or is that foolishness?
Thanks all:
JD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cam bearings, B20 [1800]
posted by  jaydee subscriber  on Mon Nov 29 17:05 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.