Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

744ti wont stay running after new wiring harness.... 700

posted by  John Parker on  Tue Nov 30 11:07 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

So I got a new harness for the old brick today and got it in. Im positive its all hooked up correctly etc etc. When I went to start her up it started right up... died. Started again...died repeated this 3-4 times. Started thinking about what it could be and the symptoms seemed like to a bad AMM. I knew these symptoms as the AMM has been replaced on 2 of the 4 volvos we currently own. I pulled the AMM plug and it started and ran... like shit but ran. I tried using another known good 007 AMM and it died again. Would sound like a bad AMM but both ones I have put in are known to be good. Any ideas?
Thanks
John Parker






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 744ti wont stay running after new wiring harness.... [700]
posted by  John Parker  on Tue Nov 30 11:07 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.