Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bolt Grade for conical bushing bolt 700

posted by  yipal on  Thu Dec 2 07:17 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jun 27 22:01 CST 2012
[RELATED]

Hi, I wanted to use a longer bolt to hold in my new Poly conical bushings
up front. (The original bolt only engages 4 threads) The FAQ says to use
grade 8.8. Is it ok if I use a grade 8 bolt instead? I've only seen grade 8
bolts in my local hardware stores.

I looked up the differences, and grade 8 exceeds 8.8 on "Proof load", "Yield Strength" and "Tensile Strenth".

thanks, Alex





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bolt Grade for conical bushing bolt [700]
posted by  yipal  on Thu Dec 2 07:17 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.