Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

High Revs 245T Pinched off hose solution? 200

posted by  madvolvofan on  Sun Dec 5 04:34 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

MY 1984 Volvo 245 Turbo had very high revs (over 2500) after the turbo was replaced. One mechanic thinks it is a damaged wiring harness. I read on this website that you can test if it the Idle Air Value by pinching off the hose going to the IAC. I did this and it cuts the idle greatly. I want to know what damage I will do to my car if I just clamp the hose and solve the high revs in this way?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New High Revs 245T Pinched off hose solution? [200]
posted by  madvolvofan  on Sun Dec 5 04:34 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.