Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wiring Help after replacing Heater Blower 200 1987

posted by  captviper on  Mon Dec 13 10:44 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 26 10:51 CST 2011
[RELATED]

All,
I'm currently replacing my heater blower (and associated items)in my 1987 245, I have the blower motor installed and as Art states checked tp see if it worked. No rotation with power hooked to switch but the motor works when directly power off battery. I get no voltage reading with the key on at the red power connection at the switch, I have checked the fuse #3, replaced the blower switch to no avail and traced out using the Volvo wiring diagram. Any help would greatly appreciated.
--
Don - 86 245,87 245, 91 244






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wiring Help after replacing Heater Blower [200][1987]
posted by  captviper  on Mon Dec 13 10:44 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.