Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

coolant temp sensor woes 200

posted by  philski3 on  Sun Dec 19 06:51 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 15 00:14 CST 2007
[RELATED]

I have an 89 240 wagon. I changed out the coolant temp sensor and the service engine light came on and wont go off. What is the reason for this? I thought it might be the inferior autozone sensor I put in so I took it out and put the bosch back in and ck engine light is still on. I checked OBD and it gave a 1-2-3 which is the sensor. I'm stumped--have I missed something. I also changed intake manifold gasket. I'm wondering if there is something I didnt get connected when I put it back together. The connector to the cool temp sensor looked fine. I put a little dialectic grease to insure contact. Please help. This was a ton of work-- I hate when I get stuck after all that. Phil





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New coolant temp sensor woes [200]
posted by  philski3  on Sun Dec 19 06:51 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.