Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

trans cooler line leak 700 1990

My 1990 745GL is leaking ATF from one of the cooler lines. Right about where the block mates to the bell housing I have a bracket that hangs the exh and there is a small clamp that holds the two lines still. The lower of the lines is leaking right where the bracket holds them. I went to FAQ's and someone had a similar problem they solved with a compression fitting. That would interfere with the bracket/clamp my car has unless I eliminated the bracket or modified it.
Is that bracket entirely necessary and is a compression fitting safe enough?
Thanks in advance
-Brent
brentbasics@hotmail.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New trans cooler line leak [700][1990]
posted by  guysaab  on Sun Dec 19 16:34 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.