Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Motor mounts 200 1988

posted by  jekyll on  Mon Dec 27 05:02 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Spent a good part of yesterday replacing the motor mounts. Muchas gracias to Dave Shannon for the excellent instructions. If you plan to do this, get yourself a 17mm ratcheting box end wrench. You can only get about 5 degrees of rotation on the bolt holding the mount to the crossmember on the driver's side, so it takes FOREVER to remove the blasted thing with a normal wrench.

Now on to the transmission mount. Advice, anyone?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Motor mounts [200][1988]
posted by  jekyll  on Mon Dec 27 05:02 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.