Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Need Help Identifying Two Connectors Under Hood 200 1981

posted by  DougC on  Mon Jan 3 15:37 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

Can anyone help me identify the purpose of two connectors under the hood on the driver's side of my 1981 B21F California engine? It's a CIS K-Jet with the throttle switch, coolant temp sensor, and idle air control valve.

1. Red wire with male spade connector right by the coil.

2. Another male spade connector in the same general area with two green wires connected to it which lead into the wiring harness that goes through the firewall.

Thanks in advance for any help with this.
--
Thanks everyone for the advice. 81 242 Brick Off Blocks, Turbo bars and wheels, B21F, M46; 86 244, B230, 148k , auto.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need Help Identifying Two Connectors Under Hood [200][1981]
posted by  DougC  on Mon Jan 3 15:37 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.