Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ignition Key Switched to Position II, before Starting, but only Oil Pressure Light On 200

posted by  RLC on  Thu Jan 6 23:02 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello folks,

Got a 1981 244DL, with B21A engine. Removed Alternator, reconnected everything, but now when I switch the Ignition Key to Position II, described on Page 8 of Owner's Manual, only the Oil Pressure Light Illuminates, the Battery Light does not, though Charging checked with a Multimeter, the Parking Brake does not, though illuminates when the Parking Brake Handle is pulled, the Brake Failure Light does not illuminate, and the Bulb Failure Light does not illuminate. Any ideas why not?

I checked all fuses. I rechecked the Alternator connections. I pulled the Bulb Failure Sensor, cleaned the terminals and plugged it in, to no avail. I am out of answers.

Any help, thoughts, ideas would be appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ignition Key Switched to Position II, before Starting, but only Oil Pressure Light On [200]
posted by  RLC  on Thu Jan 6 23:02 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.