Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

When should auxiliary belt tensioner be replaced 900 1993

posted by  MDiamante on  Fri Jan 7 11:47 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 20 15:11 CST 2008
[RELATED]

My 93 964 has 95K miles. How can I tell if the auxiliary belt tensioner needs replacement and if has been replaced before?

The part numbers that I found are:
Tensioner - Volvo 6842019 USA 3
Pulley - Dayco NTN 6203LH

How much fore and aft play should it have?
I pushed on it with the engine running and the pulley moved back more than half the width of the belt.

I just replaced the belt tensioner on my 1997 V8 Chevrolet and it was tight.
Should the Volvo have this much play?

The pulley bearing sound pretty good when spinning it manually.

The belt doesn't make noise after startup and it can be depressed just a tiny bit.

I am presently trying to remove the hex screw and pulley. They are very tight.

I would like to open this up and lubricate it. Does it matter what kind of grease that I use?

Thank you,
Michael Diamante
1993 964 95K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New When should auxiliary belt tensioner be replaced [900][1993]
posted by  MDiamante subscriber  on Fri Jan 7 11:47 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.