Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What exhaust gaskets do you use? 200 1982

posted by  someone claiming to be 240 pilot on  Wed Jan 12 14:53 CST 2005 [RELATED]

I have to replace my exhaust gaskets, they're making that awfull klackity-klackity noise. The leak is on the firewall side of number 4 (ofcourse, because #4 is the cursed cylinder), so I'll replace all of em. FCP has pictures of the ones they sell and the Elwis ones look stronger (?) than the Elring. But isn't Elring a good brand? So which brand do yall's use? Are the IPD offerings good? AND Should I go ahead and replace the down pipe O-rings or what? Never done this job before but it seems real easy and rewarding, any advice is extremely useful to me.

'82 244 Gl B21f MPG K-jet!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What exhaust gaskets do you use? [200][1982]
posted by  someone claiming to be 240 pilot  on Wed Jan 12 14:53 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.