Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wiring harness problem 700 1987

posted by  eaglescout on  Fri Jan 14 04:04 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Okay, I got a WH for my 87 760 turbo from Barton and I got around to installing it. If any of y'all have gotten one from Barton you know he includes a packect illustrating the connectors. This packet is for my car and matches the new WH, so it is the right one. However, when I got to the TPS connector I noticed a white/black wire coming out of slot 3 on the old connector and it completly seperates from the WH. As best I can tell it leads to the front of the air box. On the new WH there is no wire on the third slot, consitent with the packet.

Has anyone delt with this before and know what I should do? I've considered pulling the wire out of the old TPS and inserting it in the new one, but I don't want to mess anything up.
--
eaglescout - 1987 760T sedan.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wiring harness problem [700][1987]
posted by  eaglescout  on Fri Jan 14 04:04 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.