Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Headgasket Replacement Part II 200

posted by  Morph on  Sat Jan 22 10:12 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 18 04:16 CST 2009
[RELATED]

I had my Cylinder head dye tested and re-surfaced. The auto machine shop was able to look at it and tell were the leak was within about 10 seconds of seeing it. It was where I suspected in Cylinder 3 as I had an unusually clean sparkplug in #3. The head went on this morning and everything went together perfectly along with the timing belt. The engine started first time and there is no more oil in water or water in oil and the engine runs like a top.

However, I filled my radiator with water to see if I could detect any oil and after running the engine at idle it appears there is a little water in the tailpipe. This is after running the car for some time. So now I'm really concerned that I have a cracked block ? Any advice ?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Headgasket Replacement Part II [200]
posted by  Morph  on Sat Jan 22 10:12 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.