Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2007 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Got into a little mess over the weekend with the 960 900

posted by  poolman on  Sun Jan 23 09:12 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Dec 26 02:03 CST 2010
[RELATED]

Was out with the local Boy Scout troop and my son camping over the weekend, got onto a rough road that got out my plastic skid pan on the way in, on the way out caught my oil filter housing and bumped it enough that it seems the o ring between the oil cooler and engine block, bulged the o ring enough that it lost oil and oil presure. When the light came on I cut it off so no harm is been done internally I hope may have gone 40 feet from when it happened and when the light came on.
Question, there seems to be one bolt and a huge one at that that goes through the oil filter housing and the oilcooler holding everything to the engine block, is this right? Does anyone have a pic showing all of this assembly? Last but not least who has a pan that is stronger than the stock part made I heard of this somewhere in the past but don't know where to look now.
Thanks for all replies.
Poolman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Got into a little mess over the weekend with the 960 [900]
posted by  poolman  on Sun Jan 23 09:12 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.