The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Got into a little mess over the weekend with the 960 900

Was out with the local Boy Scout troop and my son camping over the weekend, got onto a rough road that got out my plastic skid pan on the way in, on the way out caught my oil filter housing and bumped it enough that it seems the o ring between the oil cooler and engine block, bulged the o ring enough that it lost oil and oil presure. When the light came on I cut it off so no harm is been done internally I hope may have gone 40 feet from when it happened and when the light came on.
Question, there seems to be one bolt and a huge one at that that goes through the oil filter housing and the oilcooler holding everything to the engine block, is this right? Does anyone have a pic showing all of this assembly? Last but not least who has a pan that is stronger than the stock part made I heard of this somewhere in the past but don't know where to look now.
Thanks for all replies.
Poolman






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.