Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Adjusting drivebelt tension 200

posted by  someone claiming to be someguy on  Sun Jan 30 14:32 CST 2005 [RELATED]

Hey guys,

I need some help adjusting the drivebelt tension, mainly the belts that run my alternator.

I have between 1/4 inch and 1/2 inch of deflection in the two belts that connect the water pump, alternator and fan.

How hard is it to adjust the tension? Kind of a noobie to mechanics.
Its my understanding that to tighten the divebelt to the alternator I loosen the alternator mounting bolts, grab a pry bar and pry it till the tension is tight? How many mouting bolts are there for the alternator? Is it hard to get access to?

Its on a 1980 240 DL.

Thanks for the help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Adjusting drivebelt tension [200]
posted by  someone claiming to be someguy  on Sun Jan 30 14:32 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.