Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing front tranny seal on AW70 - How do you do it? 200 1989

uid 25253's pic
posted by  Cabbie2169 on  Mon Feb 7 02:20 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I pulled off the torque converter and saw the front seal of the tranny. Wasn't leaking...but then again, ..this tranny has been on the shelf at the local foreign car parts place for a while. I removed the pan and washed ...fluid appeared brownish red.

I've done a tailshaft bushing replacement before...so I'm okay on how to do that task...however, I'm not sure how to replace the front seal behind the torque converter. Any special tools? precautions? Thanks!!
Cabbie2169






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing front tranny seal on AW70 - How do you do it? [200][1989]
posted by  Cabbie2169  on Mon Feb 7 02:20 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.