Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

HELP!!brake booster replaced. Problems 200

posted by  Taifoon on  Sat Feb 12 09:15 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 8 19:14 CST 2009
[RELATED]

hello. i just replaced the brake booster due to a diaphram leak. i replaced it fine with a new one from fcpgroton but now the brakes and the pedal are on and it seems like they are applied. it seems that the brakes are being applied and there is no play in the pedal. its like the pedal is tight and the brakes are on full. what should i do? i didn't bleed the brakes or do anything, since i thought it wasn't necessary if i just attached the master cylinder to the booster. why are the brakes and pressure so tight? Any help? Please i need to fix this asap. thanks in advance. this is a 1993 240 sedan, with 126,000 miles~ i can barely put the car in drive since the pedal is so tight and i have to step really hard to put the care in gear. Any ideas?Is it just a brake bleed?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HELP!!brake booster replaced. Problems [200]
posted by  Taifoon  on Sat Feb 12 09:15 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.