Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater control valve adjustment - Is this the right screw? 200

posted by  88wagon on  Tue Feb 15 07:44 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi, all

I posted a message yesterday having to do with my A/C not getting very cool when the temperature adjustment lever is all the way to "cool" and the heat getting extremely hot when the lever is only slightly moved towards a warmer setting.

A couple of people suggested that I attempt to adjust the heater control valve by adjusting a screw. I removed the driver side kick panel to gain access to the heater control valve and I have located a screw on the heater control valve's side that has a star shaped hole instead of a flat-head or phillips-head hole. It looks to be coated in some kind of brown glue to keep it from moving. Is this the adjustment screw?

Thanks again! The Brickboard is a life saver!
Drew





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Heater control valve adjustment - Is this the right screw? [200]
posted by  88wagon  on Tue Feb 15 07:44 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.