Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'89 740 front wheel bearing nut size and torque 700 1989

posted by  chasmike on  Wed Feb 16 07:02 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am replacing left and right front axle bearings and hubs (integral unit) on my 1989 740GL. They held up well for 210K! I have two questions that I cannot find ansers for in my service books:

1) Size of the nut on the axle stub (this is NOT a crown nut; no cotter pin). I simply need to buy a new socket.
2) Torque specification and procedure after the new hub is installed. I assume I use an appropriate thread locking compound also.

Appreciate anyone's help!

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '89 740 front wheel bearing nut size and torque [700][1989]
posted by  chasmike  on Wed Feb 16 07:02 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.