Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

84 240 25A FI wiring 200 1984

posted by  rsplittgerber on  Sun Feb 20 15:12 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Our family 84 240DL 350K miles in hands of daughter for last 4 years has been in family for 20 years, always reliable. First time ever, died a few block from home. I found the 25a FI fuse under hood near battery had blown. Pulled fuse #5 (pre-pump) and #7 (mail pump) fuses, disconnected wires from main and pre-pump, insert new 25a fuse - POP, blew again. Seems like direct short. Can't find any signs of wiring loom failure as it runs along driver's side of engine, or enters firewall. No corrosion, or water around fuse block - connections all look clean.

Anyone know if the fused side of the 25a FI circuit runs directly to the main fuse block near driver's left knee? That is, can I run a new wire from the 25a blade socket through firewall to the right side of fuse #7? Does that red wire from the 25a fuse go anywhere else before it connects to fuse #7??

Thank you in advance for any suggestion.

Cheers!
/Ron






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 84 240 25A FI wiring [200][1984]
posted by  rsplittgerber  on Sun Feb 20 15:12 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.