Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vacuum gauge reading 200 1993

posted by  Irollturbo on  Sun Feb 20 15:50 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 6 14:36 CST 2014
[RELATED]

Vacuum gauge connected at intake where at the accessory vacuum pickup (above flame trap pickup)

Gauge reads ~17" but the needle bounces randomly +/- 1 or 2 "

Idle is slightly rough when idling and seems to be smoother at times.

Car is intermitently stalling when coasting to a stop.

The idle has hunted when cold between 700 and 1200rpm. This only happened a couple times when it got down to 30 degrees here.

I am unable to find any vacuum leaks. I tried a different set of plugs as well.

Any ideas? This is driving me crazy.

-Ted






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vacuum gauge reading [200][1993]
posted by  Irollturbo  on Sun Feb 20 15:50 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.