Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Follow-Up on quality of aftermarket turn signal lamps. 900

uid 19's pic
posted by  jbowers on  Mon Feb 21 02:43 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jan 22 13:49 CST 2012
[RELATED]

Last week I ordered a set of $29.99 front turn signal assemblies from lampsandlenses.com off ebay as apposed to about $85, after disounts, for a set of Volvo OEM assemblies from my dealer.

They arrived on Friday and I put them in this weekend. They were missing the caps for the vents so I just tranfered them from the old assemblies. They also didn't have the strip of foam rubber that cushions the back end against the fender so I peeled off the old ones and used double sided tape to put them on the new assemblies. Otherwise they seemed fine. The sockets fit and the assemblies fit the car well. I put some dialectric grease on the socket "O" rings to ensure a good seal. Overall, I'm happy with new looking lights that saved me about $90.
--
'96 965, 16' wheels, rear 18mm bar & Koni + 204HP cams at 123K. Had '85 745 Turbo Diesel for 200K.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Follow-Up on quality of aftermarket turn signal lamps. [900]
posted by  jbowers subscriber  on Mon Feb 21 02:43 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.