Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Oil Filler Cap Gasket 200 1989

posted by  TONY H on  Wed Feb 23 02:03 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 16:39 CST 2014
[RELATED]

What's the deal? Does anyone have a gasket that doesn't turn very hard and start to leak after 6 months?

Flame trap is clean, Oil seperator canister is clear, I can blow down the hose easily and hear it through the Valve Cover. So I don't think I have any Over Pressure issues. All I get is oil weeping down the Valve Cover from the Filler Cap.
I've played games by cutting a cardboard gasket to add thickness to the original. I do that as a temperary fix until I get a new Gasket. After the new gasket I take the cardboard off. It works for a few months and then the gasket gets hard and we get leakage again. A nice Flexible O'ring that stays pliable must be out in the world someplace.
--
'75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Filler Cap Gasket [200][1989]
posted by  TONY H subscriber  on Wed Feb 23 02:03 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.