Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

front crank seal B23F 200 1984

posted by  jaydee on  Wed Feb 23 17:00 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I need to remove the crank nut in order to get at a leaking crank seal. I have in the past used the 'old rope trick' on my Jensen to accomplish this. I stuffed copious amounts of clean rope down number one cylinder and used a johnson bar with a 22mm socket to break the crank nut free. The rope prevents the engine from turning. Is this technique something to be avoided on the B23F? Are there other simple techniques to acomplish the same objective, that do not call for special Volvo tool number 5034??
TIA
J Dymond
Fort St John BC






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New front crank seal B23F [200][1984]
posted by  jaydee subscriber  on Wed Feb 23 17:00 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.