Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

HELP!! I Can't get the A/C condenser drive belt off!! 200 1993

posted by  turfmaster on  Sun Feb 27 12:06 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 21 02:07 CST 2007
[RELATED]

I am at a total stand still with replaceing my drive belts. I have a 1993 240 wagon w/ B230F engine. I can get the 2 alternator belts and the power steering belt loose, but I am stuck on the A/c condenser to crankshaft pully belt. I loosened the two accessory bushings under the condenser, and loosened the 13mm nut that is on the slide adjuster at the top front of the condenser. Now, I don't know if I should start cranking on the long (3-4") 10mm adjustment screw or not. I was messing with the one on the power steering pump, and I sheered it off!! Please let me know what I need to do to loosen that A/C condenser to slip the belt off, and also where I should get another long 10mm adjusting screw for the power steering pump. Also, if I snug everything up without that 10mm bolt on the power steering pump, would it be safe to drive the car. Please help me, I am really stuck here. Thanks so much!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HELP!! I Can't get the A/C condenser drive belt off!! [200][1993]
posted by  turfmaster  on Sun Feb 27 12:06 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.