Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Hood release on a 164 140-160 1975

posted by  KlausC on  Sun Mar 6 05:25 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

It's already 42F outside and decided to work on my car today and enjoy the heat. The hood release cable/handle is stuck. The handle won't move even one millimeter. I unclipped the end from the latch, taped a BIC pen barrel to the end of it, hooked it to the open hood (up high) and sprayed PB Blaster into the barrel. Lots of PBBlaster! Still no movement.
How do I take the whole thing out of the car? Should I? My fingers won't reach under the hood hinges where the cable goes through the firewall, and I can't see anything to release the handle from the cable in the inside of the car.

Help please,

Klaus
--
98 V70Rawd(101Kmi), 95 854T(85K mi), 75 164E(173K mi)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hood release on a 164 [140-160][1975]
posted by  KlausC subscriber  on Sun Mar 6 05:25 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.