Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help...rite in the middle of inner tie rod replacement. Don't see peen. 200 1989

uid 25253's pic
posted by  Cabbie2169 on  Fri Mar 11 04:35 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a cam rack. Trying to replace inner tie rod ends. I've got the inner tie rod disconnected from the outer tie rod end. Boot is off. The new inner tie rod simply looks like it would screw directly into the female end of the rack. According to others...there is supposed to be some sort of "peen" to keep the inner tie rod from coming unscrewed from the female end of the rack. I don't see it.

Here's the other problem. I have a vice grip on the body of the inner tie rod ball joint and I COULD put some torque on it to get it loosened from the female end of the rack, but I'm scared I'll damage the rack. So..I put a large crescent wrench onto the flattened portion of the rack gear...but I'm still not sure if I can put a lot of pressure to unscrew because of this darn "peen" thing that I don't even see.

Gimme a hand here. Thanks,
Cabbie2169






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help...rite in the middle of inner tie rod replacement. Don't see peen. [200][1989]
posted by  Cabbie2169  on Fri Mar 11 04:35 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.